Split Ac Repair

Air Conditioner Repairing Services

​Behind an improperly functioning AC, there can be anything from minor electrical faults to major technical issues. Our goal is not just to get your AC running temporarily, but to identify the root cause of the problem and provide a permanent solution. Our skilled technicians meticulously check all essential parameters during every repair service.

​What We Check (Our Comprehensive Inspection Checklist)

​We follow a precise and strict checklist so that no fault or defect goes unnoticed:

​Refrigerant Gas & Pressure Check: To maintain the optimum cooling performance of your AC, we use digital manifolds/gauges to accurately measure the correct gas pressure (such as the suction and discharge pressure of R32 or R410A).

​Gas Leakage Detection: If the refrigerant level is low, we utilize advanced electronic leak detectors and professional methods to inspect the indoor evaporator coil, outdoor condenser coil, and joints for subtle leakages.

​Ampere & Voltage Load Check: Using a clamp meter, we verify if the compressor and fan motor are drawing the correct current (Amps) and voltage while running, ensuring the longevity of your AC.

​Inverter & PCB Diagnostics: For modern inverter ACs, we run deep diagnostics on the main PCB (Printed Circuit Board), IPM (Intelligent Power Module), and sensors to check their signals and operational efficiency.

​Compressor & Fan Motor Health: We thoroughly examine the compressor's winding resistance, terminal connections, as well as the fan motor's capacitor and bearing conditions.

​Electrical Wiring Inspection: The interconnecting cables between the indoor and outdoor units are fully checked for loose connections, damage, or burnt wires.

​Drainage & Blockage Check: To prevent water leakage issues from the indoor unit, the drain tray and drain pipe are thoroughly tested for any blockages or accumulated sludge.